Effect of Penetration Enhancers on Toenail Delivery of Efinaconazole from Hydroalcoholic Preparations

The incorporation of permeation enhancers in topical preparations has been recognized as a simple and valuable approach to improve the penetration of antifungal agents into toenails. In this study, to improve the toenail delivery of efinaconazole (EFN), a triazole derivative for onychomycosis treatment, topical solutions containing different penetration enhancers were designed, and the permeation profiles were evaluated using bovine hoof models. In an in vitro permeation study in a Franz diffusion cell, hydroalcoholic solutions (HSs) containing lipophilic enhancers, particularly prepared with propylene glycol dicaprylocaprate (Labrafac PG), had 41% higher penetration than the HS base. Moreover, the combination of hydroxypropyl-β-cyclodextrin with Labrafac PG further facilitated the penetration of EFN across the hoof membrane. In addition, this novel topical solution prepared with both lipophilic and hydrophilic enhancers was physicochemically stable, with no drug degradation under ambient conditions (25 °C, for 10 months). Therefore, this HS system can be a promising tool for enhancing the toenail permeability and therapeutic efficacy of EFN.     

Poly(Pyridinium Salt)s Containing 2,7-Diamino-9,9′-Dioctylfluorene Moieties with Various Organic Counterions Exhibiting Both Lyotropic Liquid-Crystalline and Light-Emitting Properties

A series of poly(pyridinium salt)s-fluorene main-chain ionic polymers with various organic counterions were synthesized by using ring-transmutation polymerization and metathesis reactions. Their chemical structures were characterized by Fourier Transform Infrared (FTIR), proton (¹H), and fluorine 19 (¹⁹F) nuclear magnetic resonance (NMR) spectrometers. These polymers showed a number-average molecular weight (M_ns) between 96.5 and 107.8 kg/mol and polydispersity index (PDI) in the range of 1.12–1.88. They exhibited fully-grown lyotropic phases in polar protic and aprotic solvents at different critical concentrations. Small-angle X-ray scattering for one polymer example indicates lyotropic structure formation for 60–80% solvent fraction. A lyotropic smectic phase contains 10 nm polymer platelets connected by tie molecules. The structure also incorporates a square packing motif within platelets. Thermal properties of polymers were affected by the size of counterions as determined by differential scanning calorimetry and thermogravimetric analysis measurements. Their ultraviolet-visible (UV-Vis) absorption spectra in different organic solvents were essentially identical, indicating that the closely spaced π-π* transitions occurred in their conjugated polymer structures. In contrast, the emission spectra of polymers exhibited a positive solvatochromism on changing the polarity of solvents. They emitted green lights in both polar and nonpolar organic solvents and showed blue light in the film-states, but their λ_em peaks were dependent on the size of the counterions. They formed aggregates in polar aprotic and protic solvents with the addition of water (v/v, 0–90%), and their λ_em peaks were blue shifted.     

Regulation of Multicolor Fluorescence Changes Found in Donor-acceptor-type Mechanochromic Fluorescent Dyes

The regulation of multicolor fluorescence changes in mechanochromic fluorescence (MCF) remains a challenging task. Herein, we report the regulation of MCF using a donor-acceptor structure. Two crystal polymorphs, BTD-pCHO(O) and BTD-pCHO(R) produced by the introduction of formyl groups to an MCF dye, respond to a mechanical stimulus, allowing a three-color fluorescence change. Specifically, the orange-colored fluorescence of the metastable BTD-pCHO(O) polymorph changed to a deep-red color in the amorphous-like state to finally give a red color in the stable BTD-pCHO(R) polymorph. This change occurred by mechanical grinding followed by vapor fuming. The two different crystal packing patterns were selectively regulated by the electronic effect of the introduced functional groups. The two types of selectively formed crystals in BTD(F)-pCHO bearing fluorine atoms, and BTD(OMe)-pCHO bearing methoxy groups, respond to mechanical grinding, allowing for the regulation of multicolor MCL from a three-color change to two different types of two-color changes.     

Substituent Effects on the Vibrational Properties of the CN Stretch Mode of Aromatic Nitriles: IR Probes Useful for Time-resolved IR Spectroscopy

Developing ideal IR probes is essential to understand the structure and dynamics of biomolecules with time-resolved IR spectroscopies and imaging techniques. Especially, nitrile (CN) group has recently been proposed to serve as IR probes of the local environment of proteins. Herein, we investigated the effect of a substituent on the vibrational properties of the benzonitrile. The electron-donating and withdrawing character of p-substituent on benzonitrile are expected to modulate the vibrational frequency, molar extinction coefficient, and vibrational lifetime of CN probe. FT-IR revealed the positive correlation between electron-donating character and the molar extinction coefficient of CN stretch mode. Infrared pump-probe (IR-PP) measurements showed that the vibrational lifetime of CN stretch mode exhibits a relatively weak correlation with the electron-donating strength. Among the investigated samples, 4-dimethylamino benzonitrile with the strongest electron-donating strength shows enhanced absorption and extended vibrational lifetime. Utilizing substituent effects will be a practical strategy to improve the performance of the IR probe.     

Medical radioisotope 89Zr production with RFT-30 cyclotron

Journal of Radioanalytical and Nuclear Chemistry - 89Zr is an emerging radionuclide with promising application in nuclear medicine for the non-invasive diagnosis of various cancers with PET...     

Single Chlamydomonas reinhardtii cell separation from bacterial cells and auto-fluorescence tracking with a nanosieve device

A planar, transparent, and adaptable nanosieve device is developed for efficient microalgae/bacteria separation. In the proposed method, a sacrificial layer is applied with dual photolithography patterning to achieve a 1D channel with a very low aspect ratio (1:10 000). A microalgae/bacteria mixture is then introduced into the deformable PDMS nanochannel. The hydrodynamic deformation of the nanochannel is regulated to allow the bacteria cells to pass through while leaving the microalgae cells trapped in the device. At a flow rate of 4 μL/min, the supernatant collected from the device is indistinguishable from a control solution, indicating that nearly all the microalgae cells are trapped in the device. Additionally, this device is capable of single cell auto-fluorescence tracking. These microalgae cells demonstrate minimal photobleaching over 250 s laser exposure and could be used to monitor hazardous compounds in the sample with a continuous flow. This method will be valuable to purify microalgae samples containing contaminations and study single-cell heterogeneity.     

Semiconductor Emitters in Entropy Sources for Quantum Random Number Generation

Random number generation (RNG) is needed for a myriad of applications ranging from secure communication encryption to numerical simulations to sports and games. However, generating truly random numbers can be elusive. Pseudorandom bit generation using computer algorithms provides a high random bit generation rate. Nevertheless, the reliance on predefined algorithms makes it deterministic and predictable once initial conditions are known. Relying on physical phenomena (such as measuring electrical noise or even rolling dice) can achieve a less predictable sequence of bits. Furthermore, if the physical phenomena originate from quantum effects, they can be truly random and completely unpredictable due to quantum indeterminacy. Traditionally, physical RNG is significantly slower than pseudorandom techniques. To meet the demand for high-speed RNG with perfect unpredictability, semiconductor light sources are adopted as parts of the sources of randomness, i.e., entropy sources, in quantum RNG (QRNG) systems. The high speed of their noise, the high efficiency, and the small scale of these devices make them ideal for chip-scale QRNG. Here, the applications and recent advances of QRNG are reviewed using semiconductor emitters. Finally, the performance of these emitters is compared and discuss their potential in future technologies.     

Oscillatory behavior of supersonic impinging jet flows

Oscillatory flows of a choked underexpanded supersonic impinging jet issuing from a convergent nozzle have been computed using the axisymmetric unsteady Navier--Stokes system. This paper focuses on the oscillatory flow features associated with the variation of the nozzle-to-plate distance and nozzle pressure ratio. Frequencies of the surface pressure oscillation and flow structural changes from computational results have been analyzed. Staging behavior of the oscillation frequency has been observed for both cases of nozzle-to-plate distance variation and pressure ratio variation. However, the staging behavior for each case exhibits different features. These two distinct staging behaviors of the oscillation frequency are found to correlate well if the frequency and the distance are normalized by the length of the shock cell. It is further found that the staging behavior is strongly correlated with the change of the pressure wave pattern in the jet shear layer, but not with the shock cell structure. Communicated by K. Takayama PACS 02.60.Cb; 47.40.−x; 47.40.Nm; 47.35.+I; 47.15.−x     

Laser-generated rayleigh waves in graphite/epoxy composites

This study explores the potential for application of laser-induced surface or Rayleigh waves on graphite/epoxy composites. Rayleigh waves were generated by a Q-switched ruby laser in the ablation regime and detected by a pinducer which permitted accurate phase-velocity measurements. The Rayleigh wave velocity was measured in various directions relative to the fiber direction. Experimental results agreed closely with numerical predictions in the thick plate, but showed some increase of phase velocity in the thin plate. Laser-generated Rayleigh waves, particularly along the fiber direction, showed good potential for applications in NDT.